Thread Turbine Flow Meter

Introduction：

Thread turbine flowmeter is used for volumetric total flow and/or flow rate measurement.The flowing fluid engages the rotor causing it to rotate at an angular velocity proportional to the fluid flow rate.The angular velocity of the rotor results in the generation of an electrical signal (sine wave type) in the pickup.The summation of the pulsing electrical signal is related directly to total flow.

Advantage and Service:

Modularization model design,convenient maintenance; Dual Power DC24V+Battery; Accuracy:+-0.5%/0.2%; One day delivery; Economical cost but high reliabilty;

Compact design,save your air freight;

2 years Warranty;

Provide installation vedio;

Full refund in case of bad quality;

Widely Application:

Distilled water,

Demineralized Water,

Clean Water,

Diesel,

Fuel Oil,

Glycol,

Hydraulic Lubrication,

HVAC System,etc.

Product Related

Integral Display Flange Ultrasonic Flow Meter

Size:DN15~DN6000mm Accuracy:Better than±1.0% Output:4-20mA,Pulse,RS485 MODBUS RTU Body material: DN15~DN32 is SS304 Above DN32 is carbon steel,SS304 is optional
Flange Electromagnetic Flow Meter

Flange Electromagnetic Flow Meter is ideal for conductive liquids. It is composed of a sensor and an intelligent conversion part.…
Radar Flow Meter

Velocity Measurement Range: 0.05 ～ 15m/s (Related to water flow) Velocity Measurement Accuracy: ±1% FS, ±2.5% of reading Transmitting Frequency:…
Electromagnetic Water Meter

Size: DN50–DN300 Nominal Pressure: 0.6-1.6Mpa Accuracy: ±0.5%R, ±0.2%R (Optional) Liner: Natural rubber, Neoprene, Polyurethane, F46 Electrode material: SS316L, HC, Ti,…

Thread Turbine Flow Meter

Register for consultation now

Product Related

Integral Display Flange Ultrasonic Flow Meter

Flange Electromagnetic Flow Meter

Radar Flow Meter

Electromagnetic Water Meter