Coriolis Meter Oil And Gas

Introduction

Coriolis meter oil and gas will measure the mass flow rate and actual density accurately; the Coriolis mass flowmeter is mainly used to measure the mass flow rate of the medium or output the calculated volume flow rate. The selection parameters provided by the process professional only involve the medium mass flow rate or volume flow rate; therefore, the influence of the medium flow rate will be ignored. The measuring tube of Coriolis mass flowmeter has small amplitude, which can be regarded as no moving parts and no obstructing parts, and its measured value is not affected by the flow field in the pipeline.

Besides, with batch controller, it can directly control the valve in two stages. Therefore, Coriolis mass flowmeters are widely used in chemical, pharmaceutical, energy, rubber, paper, food and other industrial sectors, and are quite suitable for batching, loading and custody transfer.

Main Features

Ensure high accuracy, standard accuracy 0.2% and can be reach to 0.1%, it can be used for standard meters on the calibration bench.

Coriolis instruments can be used in a wide range of applications, particularly useful for handling liquids from adhesives and coatings to liquid nitrogen.

The density and temperature of the measured medium can be measured online, and the concentration of solution can be derived from these measured data.

For Coriolis meters, there is no need to compensate for temperature and pressure changes. Similarly, mass measurements are insensitive to changes in viscosity and density.

Reliable operation and low maintenance rate;

The installation requirements are not high, and there are no requirements for the upstream and downstream straight pipe sections

These are called universal instruments because they are sufficient to measure almost all liquids, slurry and gases. It also can be used to measure liquid density.

Application:

QTCMF coriolis mass flow meter is the ideal choice for a broad range of industries and applications. Our Coriolis meters are used in:

Food & Beverage

Petrochemical

Oil & Gas

Paint

Process Control

And numerous other industries gases, such as CNG oil and gas

Different fields to meet the requirements of ingredient blending, filling & dosing and custody transfer etc.

Micro-flow measurements, such as fine chemical and pharmaceutical industries; Chemical, including chemical reaction system